Panasonic VIERA TC-L32U3 Manual De Usuario página 13

Press to go back to
the previous screen
Note
About broadcasting
systems
Analog (NTSC):
Conventional
broadcasting
Digital (ATSC):
New
programming
that allows
you to view
more channels
featuring
high-quality video
and sound
tc̲L32̲37̲42u3̲u30̲eng̲0600.indb 13 tc̲L32̲37̲42u3̲u30̲eng̲0600.indb 13
All manuals and user guides at all-guides.com
Auto channel setup ( ANT/Cable setup)
Select the connected Antenna in terminal
ANT/Cable setup
Step 3 of 6
Cable Antenna Not used
ANTENNA
Cable In
ANTENNA
Cable In
OK
Select
RETURN
Select "Not used" when no wire is connected to the "Antenna/Cable" terminal.
Typical when a Cable/Satellite box is connected to a TV AV input.
Prevents accidental tuning to an unavailable signal, when Cable or Satellite box is
used.
Select "Start"
Auto program Step 4 of 6
Start Skip
OK
Select
RETURN
Start scanning the channels
(Available channels are automatically set.)
Auto program
Progress
8%
Number of analog channels
10
Number of digital channels
0
Press RETURN to quit
RETURN
Complete the Auto program setup
Completion message is displayed when the Auto program scan is successfully
completed.
Auto program
Number of analog channels
10
Number of digital channels
0
Auto program completed.
Press OK to continue.
OK
RETURN
Operation of the EXIT button during "First time setup"
Press the button once to display confirmation screen. Press again to close
confirmation screen.
[EXIT confirmation screen]
Are you sure you want to exit the First Time Setup?
Yes No
To repeat the First Time Setup, select
"First time setup" in the Setup Menu.
Not used: Go to
select
OK
Skip: Go to
(Label inputs)
select
OK
This process may take up to 20 minutes.
This step is not needed when a Cable or Satellite
box is connected to an AV input.
If there is no available
OK
channel, return to
(ANT/ Cable setup).
"Not used" will be selected.
Yes Exit "First time setup"
No Return to the original screen.
(Label inputs)
-
13
2011/01/05 11:02:03 2011/01/05 11:02:03