Beper 90.352B Manual De Instrucciones página 9

Electric Kettle Use instructions
Turn off the kettle with switch before remove it from the base.
Do never immerse parts of the kettle into water or other liquids.
Do not fill the kettle under the MIN level or over the MAX level.
Before the first use, make sure to rinse correctly the kettle.
DESCRIPTION
A. Lid
B. Pouring spout
C. Handle
D. Water level indicator
E. Unit
F. Switch on/off
G. Light indicator
H. Base
HOW TO USE IT ?
Place the kettle on a stand and plane surface.
Remove the kettle (E) from the base (H) and fill it with water, respecting MIN and MAX levels in-
dicated on the water level indicator (D). you can also add water opening the lid (A) or fill it by the
pouring spout (B). Close the lid and put the kettle on the base. Plug the appliance on the socket.
Press switch on/off (F) downwards and the kettle operates. The light indicator (G) lights up. When
the switch and light turn off, water is ready to be used.
Lift the kettle only by the handle (C). The kettle becomes very hot and does be touched directly
with hands.
Disconnect the cord supply form the socket.
CLEANING
- Unplug the appliance from the socket.
- Let the kettle cool down and clean with a damp sponge.
- Do never use abrasive sponge to clean it.
- Clean regularly, at least one a month if the water is had or more if the water is very hard.
To remove lime scale, use:
White wine vinegar 8°:
Fill the kettle with ½ liter of vinegar.
Let it for about one hour without heat it.
Empty the kettle and rinse 5 or 6 times.
Repeat if necessary.
9