Publicidad
Idiomas disponibles
Idiomas disponibles
SMART FRYER
Problem
The air fryer does
not work
The ingredients
fried with the
air fryer are not
done.
The ingredients
are fried unevenly
in the air fryer.
Fried snacks arenot
crispy when they
come out of the air
fryer
I cannot slide the
pan into the
appliance properly.
White smoke
comes out of the
appliance
Troubleshooting
Possible cause
The appliance is not
plugged into the mains.
You have not set the timer.
The amount of the
ingr
edients in the
t
r
a
too much.
The set temperature is too
low.
The preparation time is too
short.
Certain types of the
ingredients need to be
shaken halfway through the
preparation time.
You used a type of snacks
meant to be prepared in a
traditional deep fryer.
There is too much food in
the tray.
You are preparing greasy
ingredients.
INSTRUCTION MAN UAL
Solution
Put the mains plug in an earthed
wall socket.
Turn the timer knob to the required
Preparation time to switch on the
appliance.
Put smaller batches of ingredients in
y
is
t
he
t
r
a
.
Smaller batches ar
y
fried more evenly
Turn the temperature control knob to
the required temperature setting
(see section 'Settings').
Turn the timer knob to the required
preparation time (see section
'Settings').
Ingredients that lie on top of or
across each other (e.g. fries) need
to be shaken halfway through the
preparation time (see section
'Settings').
Use oven snacks or lightly brush
some oil onto the snacks for a
crispier result.
Do not fill the tray beyond the Max
amount indicated in the table on the
earlier page.
Pay attention that the temperature
is well-controlled to be under 180°C
when you fry greasy ingredients in
the air fryer.
e
.
Publicidad
