Publicidad
Idiomas disponibles
Idiomas disponibles
English
Safety instructions
• Protect the product against moisture
• Avoid anti-static electricity when installing the product
• Avoid anti-static electricity when installing the HDD
Hardware Installation
1.
Turn off your PC and unplug the power cord.
2.
Open the housing.
3.
Remove the panel from the available 5.25" bay.
4.
Insert the mobile rack into the bay and screw it to the housing.
5.
Finally connect the cables of the mobile rack to the respective connectors of
your computer.
6.
Reattach the housing and connect the power cord to the AC adapter.
Driver Installation
1.
Insert the HDD into the mobile rack.
2.
Switch on your computer.
3.
The hard disk drive will be found automatically and the device can be used
immediately.
4.
Pull the switch to open the mobile rack in order to remove the HDD from the
mobile rack.
Support Delock
If you have further questions, please contact our customer support
support@delock.de
You can find current product information on our homepage: www.delock.com
Final clause
Information and data contained in this manual are subject to change without
notice in advance. Errors and misprints excepted.
Copyright
No part of this user manual may be reproduced, or transmitted for any purpose,
regardless in which way or by any means, electronically or mechanically, without
explicit written approval of Delock.
Edition: 10/2023
-3-
Publicidad
