Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Reset
With the CB radio turned off, hold down the SQ/ASQ [14] key while tur-
ning back on the radio. The message Rest Default and the firmware ver-
sion will be displayed on the screen.
After the reset, the CB radio returns to the factory settings.
Standard selection
Long press the AM/FM/BAND [16] key. The icon corresponding to the
current standard blinks on the screen. Press the CH
change the standard.
Short press AM/FM/BAND to save and exit or wait 5 seconds.
Check the Bands and frequency table at the end of this manual.
Frequency range
Frequency tolerance
Power supply
Emission power
Consumption
Frequency response
Distortion
Impedance
Reception sensitivity
Interference rejection
Audio power
Operating temperature
26.965 MHz – 27.405 MHz
±300 Hz
12 V (by the car adapter)
7.4 V ±0.4 V (by battery)
4 W AM/FM
< 1.3 A
300–3000 Hz
< 8 %
50 Ω
0.25 uv @ 12 dB
60 dB
1 W
–26 °C ~ +80 °C
- 10-
or CH
key to
Publicidad
