Publicidad
Idiomas disponibles
Idiomas disponibles
9. Bluetooth Mode
Use the MODE key (5) to select Bluetooth mode, the screen will flash "Not Connected" to indicate that the Tune is in
pairing mode. Your Tune will automatically search for the last connected device. Connect a compatible device as shown
below. When your device is connected you will hear a chime.
Bluetooth
MODE
Not
Connected
You don't need to re-pair. The Tune will automatically reconnect with your device when they are in range and both
are turned on.
To disconnect your device, long press the ENTER/SCAN key (9). You will hear a chime when your device has been
disconnected successfully. Your Tune is now ready to pair with a new device.
9.1 Playback Controls
Use your device to control playback or use the Tune's controls for the following options:
•
Previous track (11)
•
Play/Pause track (9)
ENTER/SCAN
•
Next track (10)
• Use the volume dial (7) to control the volume. You can also use your device to change the volume. Adjust the volume
on both your device and the Tune for optimum sound.
10. AUX IN Mode
Use the MODE key (5) to select AUX IN mode. Connect any audio device to the 3.5mm AUX IN port
your Tune. Use your device to control and select audio and use a combination of the volume on your device and the Tune
to adjust for optimum sound.
11. System Menu
The options are sleep, time, backlight, language, factory reset, software version.
System
INFO
MENU
< Sleep
>
System
< Factory
Reset
>
12. Sleep Function
In any audio mode you can use the sleep timer function to set a time period after which your Tune will switch off
automatically. The available options are: Sleep off, 15, 30, 45, 60 and 90 minutes. When the sleep function is in use,
this icon
and the remaining time is displayed.
System
ENTER
< Sleep
>
SCAN
To turn off the sleep function, re-enter the sleep menu, and set to "Sleep off".
System
ENTER
< Sleep
>
SCAN
13. Backlight
13.1 Timeout
Select how long until the display enters dim level. The available options are: 10, 20, 30, 45, 60, 90, 120, 180 seconds
or on (the display will not dim).
Backlight
ENTER
< Timeout
>
SCAN
13.2 On Level
Select the brightness of the display when on.
Backlight
ENTER
< On
level
>
SCAN
08 | i-box
Bluetooth
Available Devices
i-box Tune
System
< Time
System
ENTER
< SW
version
>
SCAN
Set
sleep
time
Sleep
off
Set
sleep
time
14
minutes
Timeout
*
< 60
sec
>
On
level
*
< Medium
>
Bluetooth
Bluetooth
Available Devices
Connected
i-box Tune
Connected
System
>
< Backlight
Set
sleep
time
15
minutes
Set
sleep
time
Sleep
off
Timeout
< 90
sec
>
On
level
< Low
>
on the back of
15
System
>
< Language
Absolute
80s
14
ENTER
Discover
more
at
SCAN
Absolute
80s
ENTER
Discover
more
at
SCAN
Timeout
ENTER
< 120
sec
>
SCAN
On
level
ENTER
< High
>
SCAN
>
Publicidad
