Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION
PART 1: Mount the Latch (cont.)
4. Slide the latch body upward to remove from the mounting
brackets. Set the latch body aside until Step 6.
5. Install one (included) flat head mounting screw in the front side
of the upper bracket (Figure 5).
6. Install two (included) flat head mounting screws in the front side
of the lower bracket (Figure 5).
7. Slide the latch body back down over both the mounting
brackets. Position the latch at the proper height and secure
with a (included) #8 flat head screw (Figure 3).
NOTE: The lower bracket has multiple holes to allow for vertical
adjustment of the latch (Figure 4).
Figure 3
#8 SCREW
Figure 4
MOUNTING
SCREWS
VERTICAL
ADJUSTMENT
HOLES
Figure 5
5
Publicidad
