Publicidad
Idiomas disponibles
Idiomas disponibles
FEATURES
1. The 10-501 offers seven variable length adjustments between 18-7/8" and 24".
2. Wider head improves load distribution on carpet.
3. Increased clearance permits use over stretcher heads and tubes.
4. Unique push button trigger.
5. One-Year limited warranty.
VARIABLE LENGTH
Your new 10-501 allows you to adjust the length from 18-7/8" to 24" to suit your preference.
To adjust hold the shank with one hand, preferably near the head end, and place the palm
of the other hand on the bumper with the fingers extending around the lower edge to
reach the trigger. When the trigger is pulled and held fully back, usually by the index or
center finger, the locking mechanism is released and adjustment is made.
Make sure the locking mechanism is engaged and secure before using your kicker.
VARIABLE TOOTH ADJUSTMENT
The kicker head is equipped with both hardened steel teeth and Nap-Grip Inserts (10-412-
03). Each stop of the dial moves the teeth 1/32" vertically for exact control of penetration
into carpet backing. The combination of long and short pins provides a double gripping
action that practically eliminates napping and tearing of carpeting. For peak performance,
and protection of carpet, replace the Nap-Grip Inserts when they eventually wear out.
Publicidad
