Publicidad
Idiomas disponibles
Idiomas disponibles
Cable connection
The configuration information on the back of the monitor varies by product model.
Read the following contents before connecting the product.
1. Before connecting the product, be sure to check the two ports of the supplied signal cable, as well as the
shape and position of the ports on the product and external devices.
2. Before connecting the product, be sure to remove the power cord or power adapter from the product and
external devices to prevent damage of the product due to short circuits or overcurrent.
3. After all signal cables are properly connected, connect the power cord or power adapter back to the
product and external devices.
4. After completed the connection, be sure to read the manual to familiarize yourself with the product fea-
tures, precautions, and other information needed to use the product properly.
EN
Panel control
HDMI: Using a HDMI cable to connect
the product's HDMI port to the PC's
HDMI OUT port.
DP: Please link DP cable of LED to the
port named DP IN at the back of the
LED monitor.
PC analog signal imput
M
Menu/Select
Down/Game centre
Up/Brightness
Exit/Input Menu
Standby/Power Off/On
E
16
EARPHONE OUT: Use a headset plug to
connect to the EARPHONE OUT jack.
DC IN 12V: Use the adapter to access
I the port, the power supply of this
interface only supports DC 12V, use
the matching adapter to access,
please consult the authorized service
center for the non-original adapter.
Publicidad
