INSTRUCTION MANUAL
STEAM MOP PM1000
GENERAL DESCRIPTION
1.
Steam head
2.
Body
3.
Cable hanger - bottom
4.
Arm
5.
Arm lock
6.
Cord holder - top
7.
Hand mop attachment
8.
Head/tip lock
9.
Cord
10. Hand mop
11. Switch
12. Water inlet
13. Indicator lights
14. Steam regulator
TECHNICAL DATA
− wattage: 1300 W
− supply voltage: 220-240V~ 50Hz
− capacity: 300 ml
− degree of protection: IPX4
DEGREE OF PROTECTION: IPX4
Degree of protection of an electrical appliance against the penetration of external agents.
The designation consists of the letters IP and two characters, the first indicating resistance to the
penetration of solids, and the second for water penetration. "X" protection against solid bodies not
specified, "4" protection against splashing water.
INTENDED USE
The PM1000 steam mop is intended to clean surfaces such as: stone, ceramics, linoleum and also carpets.
Thanks to the use of steam, cleaning is quick, effective and environmentally friendly as no detergents
are needed.
OPERATION
Before using, ensure that the appliance, plug and power cord are in working order and that all packaging
has been removed.
VERTICAL MOP
Folding/unfolding the mop – fig. 2.
• Holding by the body (2), lift the arm (4) and lock.
• Press the button (5) to fold the arm (4).
Putting on the steam head (1) - fig 3.
• Insert the steam head (1) into the socket at the bottom of the body (2).
• To remove the head (1), press the locking button (8).
Fastening the cleaning cap (15) - fig. 4.
• Place the cleaning pad (15) on the floor.
• Place the mop on the cleaning pad (15) so that the underside of the cleaning head (1) contacts
it evenly and press down.
Attach carpet pad (16) - Fig. 5.
• Lay the pad (16) on the floor.
• Place mop with attached pad (15) on pad (16) and press down.
14
15. Microfibre pad - large
16. Carpet pad
17. Measuring cup
18. Tank
19. Tank lock
20. Valve
21. Connector
22. Squeegee
23. Plastic brush - large
24. Plastic brush - small
25. Grout nozzle
26. Angled nozzle
27. Hand spatula / scraper
28. Microfibre pad - small
EN