Publicidad
Idiomas disponibles
Idiomas disponibles
GBL 790 18-EC
Technical data
Tool
Type
Rated voltage
Air volume
Air speed
Weight according
to"EPTA Procedure
01/2003" (without
battery)
Battery
Weight of battery
Working
temperature
Storage temperature < 50℃
Charging
temperature
Charger
Overview (see figure A)
The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1.
Blower tube
2.
Turbo switch
3.
Variable-speed trigger switch
4.
Hook hole
5.
Release button
6.
Handle
Operating instructions
WARNING!
Remove the battery before carrying out any
work on the machine.
Before switching on the machine
Unpack the cordless lawn blower and check
that here are no missing or damaged parts.
GBL 790 18-EC
Lawn Blower
Vdc 18
m
3
/h 790
km/h 151
kg
1.8
AP 18.0/2.5
18V
AP 18.0/5.0
AP 18.0/8.0
AP 18.0/2.5
kg
AP 18.0/5.0
AP 18.0/8.0
-10~40℃
4-40℃
CA 10.8/18.0,
CA 18.0-LD
NOTE
The batteries are not fully charged on
delivery. Prior to initial operation, charge the
batteries fully. Refer to the charger operating
manual.
Inserting/replacing the battery
■ Press the charged battery into the machine
until it clicks into place (see figure B).
■ To remove, press the release button (1.) and
pull out the battery(2.) (see figure C).
CAUTION!
When the device is not in use, protect the
battery contacts. Loose metal parts may short
circuit the contacts; explosion and fire hazard!
Installing and removing the
blower tube (see figure D)
0.4
WARNING!
0.7
The tube requires assembly before using.
1.1
WARNING!
To prevent accidental starting that could
cause serious personal injury, always remove
the battery pack from the machine when
assembling parts.
■ To install the blower tube, align the release
button (5) with the protrusion on the blower
housing.
■ Push the blower tube (1) onto the blower
housing until a click is heard to signal that
the protrusion locked into place.
■ To remove the blower tube, press the
release button (5) and pull off the blower
tube (1) straight from the blower.
Hook hole(see figure E)
The blower is equipped with a hook hole (4).
The blower can be hung on a hook with the
hole.
Starting and stopping the
blower(see figure F)
The variable-speed trigger switch (3) can
turn the blower ON/OFF and deliver variable
speed. The blower is also equipped with a
turbo switch (2) to turn the blower ON/OFF
and lock the blower at a speed.
To turn the blower on
■ Install the battery and depress the variable-
speed trigger switch (3).
■ The variable-speed trigger switch (3)
15
Publicidad
