Conceptronic ORAZIO02 Guía De Instalación Rápida página 4

English
Congratulations on the purchase of your Conceptronic ORAZIO02.
When problems occur, we advise you to visit our support site (go to
www.conceptronic.net and click on 'Support'). If you have other questions about your
product and cannot find it on our website, please contact us via email:
support@conceptronic.net.
For more information about Conceptronic products, please visit the Conceptronic website:
www.conceptronic.net.
Installation & usage
◼ Open the battery compartment and insert the batteries. Close the compartments
securely.
◼ Power on the keyboard and mouse.
◼ Connect the USB NANO receiver. No driver installation is required.
◼ The keyboard and mouse are ready to use.
Please note: If no keys are pressed on the keyboard and mouse for 10 minutes, they'll
enter sleep mode. Press any key to wake them up.
Multimedia keys
FN + F1
Media
Player
FN + F7
Play/Pause
Troubleshooting
If pairing is not successful.
Keyboard:
1. Turn off the keyboard and then turn it on again.
2. Short press the "CONNECT" key and plug the USB receiver into the computer.
3. Maintain a distance of within 30cm between the keyboard and the USB receiver. The
indicator light for pairing will flash for 3 seconds and then go out. The keyboard will work
normally after that.
Mouse:
1. Turn on the mouse.
2. Simultaneously press and hold the middle button and the right button until the left
indicator light flashes rapidly.
3. Insert the receiver.
FN + F2 FN + F3
Volume Volume
Down
FN + F8 FN + F9
Stop Browser
FN + F4
Mute
Up
FN + F10
Email
FN + F5 FN + F6
Previous Next Track
Track
FN + F11 FN + F12
My Favorite
computer