Publicidad
Idiomas disponibles
Idiomas disponibles
How To Oscillate:
The oscillating control button is located on the top of
the motor housing. Simply press down to oscillate and
lift up to stop the oscillation.
Cleaning:
CAUTION: Before cleaning the fan, be sure to
disconnect the power cord. Clean the grill with a clean
damp cloth. Do not use harsh chemicals or abrasive
cleaners. DO NOT IMMERSE THE FAN OR ANY WIRES IN
WATER. Replace the front grill before using the fan
again. Allow the fan to dry completely before use.
Periodic cleaning with a vacuum will help prevent dust
build-up. The motor is sealed and does not require any
further lubrication.
Storage:
Keep the original carton for storing the fan. Coil and tie
the power cord to avoid damaging the cord.
Replacing The Fuse:
1. Disconnect the power cord from the outlet.
2. Open fuse cover by sliding the fuse access cover
open. (fig 2)
3. Carefully remove fuse.
4. Replace fuse with an identical model. Use a 5.0 A,
125 V (3.6mm x 10mm) fuse only.
5. Close fuse access cover.
Questions? Comments?
Visit us at www.ImpeccaUSA.com or call us at 1-866-
954-4440 Monday-Friday 9AM - 6PM EST.
Publicidad
