Ecler HADA Serie Manual De Usuario página 29

8.1.4 HADA-4B500
HADA-4B500
INPUTS
Analogue input connection type IN1-4: 3-pin Euroblock, balanced, pitch 3,5 mm.
AMPLIFIED OUTPUTS
Number of amplified outputs 4
Amplified output connection type 2-pin Euroblock.
Output configuration Lo-Z/Hi-Z, 70V/100V, 4Ω/8Ω
OUTPUT POWER (all channels driven @ 1%THD)
Max output power @ 8Ω
Max output power @ 4Ω
Max output power @ 8Ω bridge mode
Max output power @ 100V
Max output power @ 70V
SIGNAL
Frequency response
ELECTRICAL
AC mains requirement
Power factor correction
AC mains connector
POWER CONSUMPTION @230VAC
Power Consumption (1/4 POWER, @ 4Ω)
Power Consumption (1/8 POWER, @ 4Ω)
Power Consumption (IDLE)
Power Consumption (STBY)
TECHNOLOGIES
Amplification technology
Maximum fan noise
Number of Inputs 4 analogue input channels
Input configuration Digital matrix 4 in x 4 amp. out
(Settings by HADA DSP Manager)
Output mode selection per channel/couple by software
(Settings by HADA DSP Manager)
250W
500W
1000W
1000W (Bridge mode)
1000W (Bridge mode)
Voltage gain 31 to 37 dBV
33,2 to 39,2 dBu
Input sensitivity -12 to 12 dBV
-9,8 to 14,2 dBu
0,25 to 3,98 Vrms @ Nominal power
Input impedance 21k (balanced)
Max input level 22 dBV
24,2 dBu
20Hz-20kHz (-3dB, 1W any load)
THD + Noise < 0,01
0.015 Typ
(@ 1kHz, from 0,1W to Full Power)
Crosstalk >80dB (@ 1kHz)
Power supply Universal, SMPS with PFC
100-240 V @ 50-60Hz (±10%)
> 0,92
IEC C14 inlet
TBC (all channels driven)
TBC (all channels driven)
TBC
TBC
Class D
Cooling Fan (Forced air, front to back airflow. Temperature
controlled continuously variable speed)
46dB (Maximum acoustical noise @1m)
29