Linea 2000 DO473K Manual De Instrucciones página 32

DO473K
8. When the brewing process has completed and you do not want to drink
immediately, leave the device plugged in and powered on. The keep warm plate
will make sure that your coffee remains warm for a long while. To taste the
coffee at its optimal quality, we advise you to start drinking immediately after it's
stopped brewing.
Attention: You will receive less coffee than the amount of water you added into
the reservoir, because the ground coffee will absorb the water you added.
9. Always remember to turn off the coffee maker and remove its plug when you are
no longer using it.
The device will continue working for about 30 minutes after you've pressed the ON/
OFF button. After this time, the red ON indication light will switch off and the device
will stop warming. This will ensure the device consumes less energy.
AUTOMATIC START
If you'd rather not start the coffee maker immediately, you can always choose to
program it. Take the following steps to make that happen:
1. Press once on the PROG button, CLOCK will be shown on the display.
2. Press repeatedly on the HOUR and MIN button to set the current time.
Remark: The clock works on a 24 hour system.
3. Press the PROG button again and the word TIMER will appear on the display.
4. Set the desired start time by repeatedly pressing the HOUR and MIN button.
Press the PROG button when you have set the right time.
5. Press the ON/OFF button twice, after which the AUTO indication light will
switch on. After about 10 seconds, the LCD display will show the current time.
You can check on the automatic starting time by pressing the PROG button.
Remark: You can cancel the automatic starting time by pressing the ON/OFF
button. If you'd like to change the automatic starting time, please follow the steps
1 through 4.
Whenever the set time has come, the green AUTO indication light will switch off and
the red ON indication light will switch on. The device will start working. After 30
minutes, the device will switch off automatically.
MEMORY
When the power is cut or the power cord has accidentally been removed from the plug
whilst working, the device will switch on again automatically if the power outage did
not take longer than 10 seconds. After power's been cut for longer than 15 seconds,
the device needs to be fully reprogrammed.
32