Bestron AEC2000S Manual De Instrucciones página 10

USAGE - GENERAL
The device is only intended for domestic use and not for professional use. The following description is associated with the
image on page 2:
1. Lid 2. Egg tray 3. Housing
FUNCTION - FOR FIRST USE
1. Remove the packing material.
2. Clean the device (see "Cleaning and maintenance").
FUNCTION - MEASURING CUP
Determine how hard or soft you want the eggs to be cooked by measuring the correct amount of water with the measuring
cup. Examples:
Egg number
1
2
3
4
5
6
7
FUNCTION - BOIL EGGS
1. Measure the desired amount of cold water with the measuring cup. Pour the water into the stainless steel heating
plate.
2. Use the egg piercer at the bottom of the measuring cup to prick the blunt side of the eggs. This is to prevent the egg
from cracking. Place the eggs on the egg tray and place the lid on top.
3. Insert the plug into a grounded socket and switch on the device with the rotary knob. Then use the rotary knob to set
whether you want a soft-boiled egg
according to your own preferences. The indicator light turns on.
4. When the eggs are ready, there will be a signal from the device. The indicator on the device will turn off. Wait 30
seconds before you take out the eggs. Pull the plug out of the socket.
5. Shock the eggs in cold water or under a cold tab before removing the eggshell.
6. Now you can serve the eggs.
WARNING:
• The device will switch off automaticly when the egg cooking process is done.
• The egg piercer is sharp, be careful not to hurt yourself!
CLEANING AND MAINTENANCE
1. Clean the lid, egg tray, hot plate with a damp cloth.
2. Dry the device thoroughly.
WARNING:
• Make sure that no moisture gets into the electrical connections.
• Never place the device in a dishwasher.
• Do not use any aggressive or scouring cleaning agents or sharp objects for cleaning.
Depending on the hardness of the water, limescale can form on the stainless steel heating plate. Therefore, clean the
Stainless steel heating plate regularly. Fill the measuring cup with some cleaning vinegar and add water until the measuring
cup is full. Pour this mixture into the stainless steel heating plate. Let the mixture stand for 30 minutes without turning on the
egg cooker. Pour the mixture out of the stainless steel heating plate. Dry the stainless steel heating plate thoroughly.
SERVICE
In the event of an unexpected malfunction, you can contact BESTRON customer service:
www.bestron.com/service
4. On/off switch 5. Indication light
Water for egg flavor (ml)
Soft egg Semi-soft-boiled egg
120
120
120
120
120
150
150
, a semi-soft-boiled egg or a hard-boiled egg
10
Hard boiled egg
90
80
75
75
70
70
65
. You can experiment with it
EN
120
120
120
120
120
150
150