STARTUP INSTRUCTIONS
The necessities for filling your own cigarettes.
1. Volume Tubing Tobacco - The Powermatic 2 Plus tubing machine is only suitable
for processing volume tubing tobacco. The use of hand rolling, shag- or pipe
tobacco is not permitted and cannot be processed by the machine and will cause
problems.
Advisable tobacco moisture level: < 12% Rh
●
Max. length of tobacco cut: < 20mm
●
2. Filter Tubes - The machine is suitable for using 2 different types of tubes.
King Size - Total tube length: 84mm, filter length: 15mm, diameter: 8mm
●
Extra Size - Total tube length: 84mm, filter length: 25mm, diameter: 8mm
●
OPERATING INSTRUCTIONS
1
Connect the power cord
and switch on the power.
4
Attach an empty tube
over the spoon nozzle.
SAFETY NOTIFICATION
If the spoon blocks, the red JAM indicator flashes. Switch off the machine and use
the cleaning probe to remove all tobacco from the loading chamber. After all tobacco
is removed, you can switch the machine on again.
2
Place tobacco on top and
spread evenly.
5
Push the lever completely
down to start tube filling.
3
Open the lever and compress
the tobacco into the chamber,
also push into the corners.
6
The cigarette is completed.