Ottocast U2AIR Pro Manual De Usuario página 6

How to update or report
• If your iPhone is connecting to the wireless
CarPlay, enter 192.168.1.101 on iPhone's browser,
next tap "Update" if there is an update available
• If your iPhone could not connect to the wireless
CarPlay, please join the adapter's Wi-Fi network
[OTTO-xxxx] by manual and the password is
88888888
• Next enter 192.168.1.101 on iPhone's browser,
tap "Update".
• At the same web interface, you could also fill in
the car make, model years, and issue details, next
tap "Submit" to report the issue. After the success
notification appears, take a screenshot and email
us at support@ottocast.com. We will fix it as soon
as possible.
10
NOTE! The blue and red LED indicators will flash
alternative while updating. Wait for more 30s after
the white indicator is solid, then disconnect and
reconnect the adapter from USB port to finish the
whole update.
This device complies with part 15 of the FCC Rules.
Operation
is subject to the following two conditions:
(1) This device may not cause harmful interference;
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
11