GE PP9030 Manual Del Propietário página 9

Element Cycling
Surface elements will cycle on and off to maintain the
temperature you have selected. All radiant surface elements
have a temperature limiter that protects the glass cooktop
from getting too hot, this is normal. The temperature limiter
may cycle the elements off more frequently if:
[] The pan boils dry.
[] The pan bottom is not flat.
[] The pan is off-center.
[] There is no pan on the element.
Operating The Cooking Elements
Turn Burner(s) On: Touch and hold On/Off pad about
half a second. A chime can be heard with each touch to
any pad.
Power level can be selected in any of the following ways:
1. Swi e the ra arc (on the graphics) to the desired
power level. There is no sensor on the LED_, or;
2. Touch Anywhere along the gray arc, or;
3. Touch ÷ or - pads to adjust power level, or;
4. Shortcut to Hi: Immediately after turning unit on, touch
the + pad, or;
5. Shortcut to Low: Immediately after turning unit on,
touch the - pad.
Hi
Gray Arc
Swipe Area
t
Hi
Adjust Burner Size
The burner ring size is adjustable on some elements.
The ring size can be selected by pressing the burner
ring graphic.
Single Surface
Element
\
Dual Surface
Element
Tri-Ring Surface
Element
_, ....... 5:')
C
n
Z
I
rn
0
0
0
• •
F17
3
db
,,<
db
O
Q
--4
:=7
db
o
o
3
3>
C
or)
CD
C
U_
N