order to use it safely:
a) Never try to open or dismantle the battery.
b) Do not place the battery in a high-temperature environment or nearby a high-temperature object.
c) Do not short-circuit the battery.
d) Do not put the battery in a moist environment or in water.
e) Once the liquid leaked from the battery enters the eyes, flush the eyes with clear water immediately and
take corresponding medical care.
f) Please charge the battery as introduced in the manual and follow the charging steps and precautions.
Wrong charging may heat or damage the battery or even cause injuries.
• Wipe the device as described below:
a) Non-optical surfaces: Use a clean and soft cloth to wipe non-optical surfaces of the thermal imager
when necessary.
b) Optical surfaces: Please avoid staining the optical surface of the lens when using the thermal imager,
especially avoid touching the lens with your hands since the sweat on the hands may leave traces on the
lens and corrode the optical coating on the lens surface. When the optical lens surface is stained, wipe it
with special lens wiping paper.
3