Blumfeldt Fairmont Smart Manual De Instrucciones página 51

F3: Surface temperature of the
radiator (economy mode)
Briefly press the up
button to set the temperature
in the range of 40-60 °C (default is
60 °C).
F4: WiFi
Briefly press the up
button to enter WiFi settings.
"on" means WiFi is on, "oF"
means it is off (default is "on").
After successfully connecting
to the network in the app, the
network time will be synchronised
automatically.
Restoring the factory settings
When the device is on, press and hold the on/off button
system will automatically boot and restore the factory settings. This will be
shown on the display for 3 seconds before the device turns off.
Pressing the on/off button
temperature in comfort mode is set to 22 °C and in economy mode to 20 °C.
The time is displayed as "00:00" and the day of the week as "1". Default
settings are set for P1-P7. The heating mode timer is set to 80 °C for 2 hours
heating. The temperature compensation is set to 0. The open window
detection function will be turned off. The radiator surface temperature is
set to "80" for comfort mode and "60" for economy mode. The WiFi will be
switched on.
Error description
Display Appearance
Err Interface not functional
or down
or down
restores the following factory settings: The
for 10 seconds, the
Problem
Temperature sensor
defective
EN
51