Publicidad
Idiomas disponibles
Idiomas disponibles
Insert 2xAAA batteries
I Set up remote control with code
1. Turn on the device (e.g. TV) that you would like to control.
2. Press and hold the device key( picture 2) of remote control (e.g. TV) for 3
seconds, then release the device key till the LED indicator stays on.
3. Input the 4-digit code found in the code list and click the "Power" key.
4. If the device is still on, it means the code doesn't work. You may repeat step
2 and 3.
5. When you input the right code, the device turn off automatically.
6. Press "Power" key, the device turns on.
7. The set-up steps are now complete.
II Set up remote control with brand name number
1. Turn on the device (e.g. TV) that you would like to control.
2. Press and hold the device key of remote control (e.g. TV), then press the
corresponding number key of band (refer to form 1)
(if you have a Philips TV, press and hold the device key "TV "and press
number 7)
3. Keep holding these 2 keys for 60 - 90 seconds, and keep your eyes looking
at the device.
4. When the device is powered off, release the 2 keys immediately.
5. Press "Power" key, the device turns on.
6. The set-up steps are now complete.
FINISH
Picture 2.
Publicidad
