TREVIDEA Girmi Ecofrit Deep FG92 Manual Del Usuario página 13

FG92
1 Air inlet 2 Control panel
5 Tray 6 Container
COOKING
Carefully wash all accessories and the inner housing first. Allow to ventilate the internal compartment
keeping the container (6) away for about 30 minutes. Before starting with the first cooking, turn on the
appliance for 10 minutes at the maximum temperature.
- Connect to a suitable and earthed power socket.
- Extract container (6) with care pressing the button (9) and check that the tray (5) is properly mounted on the
base of container. Insert food in the container (6) and replace the container into the housing (3).
- If appliance went in standby, press
- Set program, temperature, time of cooking, as explained in following paragraphs. Press
Caution: Never use container (6) without tray (5). Do not touch container or inner parts of appliance
during cooking and until complete cooling. Touch only the handle (8).
- Some foods should be mixed and shaked at half cooking. Take the handle (8), press the button (9) and
extract container (6). Shake it, then replace in its position.
- When you ear the timer sound (5 beeps), cooking time is finished. The air fryer keeps working for 20
seconds to cool down, then extract container and check if food is ready. If not ready, replace container in its
position and set additional cooking of some more minutes.
Note: appliance can be switched off manually, pressing
- To remove food, take out container pour food in a dish.
Be careful to the hot steam when you remove container after cooking.
Don't turn the container (6) upside down, because oil and cooking residues on the bottom of container
could drip on the foods.
- Once cooking finished, if you want to start another one, air fryer is immediately ready.
CONTROL PANEL
A. Icons 7 programs
C. ON/OFF Button
E. Time Increase button
G. Temperature Increase button
H. Temperature Decrease button
I. Button MENU'
FUNCTIONING
MANUAL FUNCTION
- If appliance went in standby, press for
- Set temperature with buttons (G and H). Set time with buttons (E and F).
- Press to start cooking.
PRESET PROGRAMS FUNCTION
- If appliance went in standby, press
- Pressing button Menù (H), you can choose between 7 preset programs: chips, shellfishes, meat, fish,
chicken tights, pizza, cakes.
- Once the program is chosen, press
o
Set temperature with buttons (G and H). Set time with buttons (E and F).
o
Press
Note. Time and temperature set on each program are studied to have correct cookings for the relative
food. It is advised to change time and temperature only based on experience (eg. Previous cookings not
finished or too long).
During cooking:
3 Housing
7 Air outlet (on the back)
on the control panel (2).
B. START button
D. Display
F. Time Decrease button
on the control panel (2).
on the control panel (2).
to start cooking, or:
to start cooking.
4 Window
8 Handle
on the control panel (2).
9 Lock button
to start cooking.
12