Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION
The pump is equipped with two multistage threaded
hose connectors, which allow the pump to be connected
to hard pipes or flexible hoses of various diameters
(Fig. 3 page 39). Connect a hose to the pump delivery.
Position the pump in such a way as to ensure that it is
entirely immersed in the water and stable. Now plug the
pump into the socket.
MAINTENANCE
Rotating parts need to be regularly accessed for
cleaning. To this purpose it is recommended to not use
any chemical detergents.
CST adv 16000: follow the instructions on page 40.
CST adv 20000/25000: follow the instructions on page 41.
Release the whells as shown in figure 1 on page 40/41.
Unfasten the screws, remove the impeller chamber, and
take out the rotor and proceed with cleaning.
Replace all parts in reverse order.
Put the pump back into the shell, inserting it into the
special slides positioned inside. Close the pump with the
remaining shell.
ATTENTION: The rotor is provided with a ceramic shaft,
that is wear-resistant, but fragile. Pay utmost attention
during maintenance operations.
TROUBLE-SHOUTING GUIDELINES
If there is insufficient water coming out of the pump:
• Check that the pump intake is clean and without any
obstructions
• Check that there are no kinks in the connected tubes
If the pump stops working:
• Check that the pump is correctly powered.
• Make sure that the water level is not too low. The intake
tube of the pump must be below the water level both on
submerged and external applications.
• Check that the rotor doesn't have any obstructions
The pump is provided with a self-resetting thermal
protector. If the pump stopped working, please
investigate if the thermal cut-off has been activated
by first disconnecting the appliance from the electrical
supply for approximately 1 hour, then remedy the
cause that made the appliance stop, and reconnect to
the socket again.
English
GUARANTEE CONDITIONS
This appliance is guaranteed from defects in its materials
and workmanship for a period of 3 years from the date
of purchase. If the appliance should not work correctly as
from the purchase date, return it to your local retailer. The
appliance will be replaced without any additional charge.
To use the guarantee service, return the appliance and
attach the proof of purchase and a detailed reason for
the claim. The appliance must be carefully packed and
protected from any damage during transport. The guarantee
does not cover damage due to impact or being dropped
after purchase. The guarantee is not valid if the product
is used incorrectly or if damage is caused by tampering
or negligence by the purchaser causing the loss of fish or
other animals, personal damage, loss of properties or other
damage that might arise. The guarantee is not valid for
components subject to wear and tear (see * pages 42/43).
CORRECT DISPOSAL OF THIS PRODUCT
(WASTE ELECTRICAL & ELECTRONIC EQUIPMENT)
(Applicable in the European Union and other European
countries with separate collection systems). This marking
shown on the produci or its literature, indicates that it
should not be disposed with other household wastes at
the end of its working life. To prevent possible harm to the
environment or human health from uncontrolled waste
disposal, please separate this from other types of wastes
and recycle it responsibly to promote the sustainable reuse
of material resources. • Household users should contact
either the retailer where they purchased this product, or
their local government office, for details of where and how
they can take this item for environmentally safe recycling.
• Business users should contact their supplier and check
the terms and conditions of the purchase contract. This
product should not be mixed with other commercial
wastes for disposal.
5 / 44
2002/96/CE • EN50419
Publicidad
