WMB TP-20 Manual De Instrucciones página 5

Quick operation guide
2.16 - Exclusive ALS system (Auto-Lock
Security), pat. pen. 200501056.hed in sa-
tin polyester.
2.17 - Three legs with plastic end caps.
3. SAFETY PRECAUTIONS.
PRO LIFTS S.L.
2.18 - Anchor of the support system of the
legs via safety catch and knob.
2.19 - Primed paint with cured polyester
dust cover. The tower is supplied in black
finish.
3.1 - The TP-20 is a machine designed to elevate loads
upwards in a vertical direction, It should NEVER be used
as a platform to elevate people.
3.2 - Only place the towerlift on hard and flat surfaces.
3.3 - The maximum load indicated on the characteristics
label and the instructions manual should not be exceeded.
3.4 - This lift should NEVER be used to elevate a load that
has not been properly checked. It is necessary to verify
that the load is correctly supported and centred on the ap-
propriate lift support so that the weight of the load will only
elevate in a vertical direction.
Depósito legal y copyright. Todos los derechos reservados.
ENGLISH
5