HAEGER Saturn 22.2V Instrucciones De Uso página 6

- If need to remove the battery pack, hold the main body, press the release button and
remove the battery pack.
2. Assembling the tube & Brush
- Fit the tube onto the main body's air inlet until it clicks into the position.
- Fit the electrical floor brush on the tube until it clicks into the position.
- If need to remove the tube or brush, hold the main body, press the release clip and
remove the tube or brush.
3. Assembling the dust container
1) Disconnect the dust container from the hand element by pressing the release
button and pulling out.
2) To put it back, align the slot in the dust container towards the hook on the main
body. Push up until the hook locks into the groove. A 'click' sound will be heard
when successfully performed.
4. Assembling the accessories nozzles
- Fit the attachment into the air inlet of the main body and/or the tube until it fits into
position.
English - 4