Rechner Sensors EG-130 Serie Manual De Instrucciones De Manejo página 7

General description
Series EG.-130... is designed for connection of 3 or 4 wire sensors with PNP or NPN transistor output
with NO and / or NC function. These units contain a DC side short-circuit protected power pack and relay
outputs. The 22 mm (EG III 70 mm) small housing is constructed for mounting on 35 mm profile rail in
an enclosure of min. IP 20.
Actuating signal:
Output:
Operating voltage, AC:
No-load current:
Ambient temperature:
Operating voltage display:
Switching state display:
Connection
EGI-130
1 Input / 1 Relay Output
24 V DC PNP, NPN or potential free mechanical contact
Relay, change-over max. 250 V AC / 6 A / 500 VA
230 V, 115 V or 48 V, 24 V depending on type.
Typ. 20 mA or 40 mA depending on type
-25...+80 °C (EG III -25...+70 °C)
LED yellow
LED green
EGII-130
2 Inputs / 2 Relay Outputs
d2 only normally open
7