ICU CLOM EasyCam Instrucciones De Uso página 19

ENGLISH
Setup
Inserting an SD card
The camera comes with an SD card. If you would like to use a different SD card
(max. 128 GB), it must be formatted in the camera.
Installing the antenna
Screw the antenna in place without applying any force.
Modes
OFF: The camera is turned off.
ON: The camera will turn on and log in to icucloud. Once a connection has been
established ("STATUS OK"), the settings of the camera can be changed and
photos and videos stored on the SD card can be viewed on the camera screen.
If no buttons are pressed for several seconds, the camera will start
automatically. Depending on the current settings, photos/videos will be taken
when the camera is triggered by the passive IR sensor (i.e. when the camera
detects activity within the detection area).
On-screen display in setup mode
Video/photo capture and playback mode
▪ In setup mode, press "" to switch between photo and video mode.
▪ Press "" to take a photo or start/stop recording video.
▪ In setup mode, press "OK" to go to playback mode, then press "" or "" to
Camera mode
Photo and video mode (only
adjustable via menu)
Resolution of the saved
image in megapixels
Signal strength
Number of photos:
saved/max. capacity
Battery charge status
SD card status
19