Publicidad
EN
This manual contains important information that should be kept
for future reference.
Self-assembly.
Warning! Keep children away from the assembly area. Leave the
plastic bags out their reach. The small parts pose a choking hazard.
Material
Structure: beech (Fagus sylvatica; origin: Romania) oak veneer,
lacquered. (Quercus robur ; origin: Romania)
Shelf and panel: particle board oak veneered. (Quercus robur ;
origin: Romania)
Drawers: melamine chipboard and HDF.
Front: painted MDF.
Back panel: melamine HDF.
Bar wardrobe: steel.
Installation Tips
Before beginning assembly, identify ail components using the
manual.
ln order not to lose components, do not throw the package before
completing the full assembly.
Using an electric screwdriver is strongly discouraged.
This product must be assembled by an adult.
Plan to assemble the furniture as near as possible to where you
want to install.
Assemble on a clean, flat surface.
Warning! Before drilling, make sure that no pipes or cables will
be present in the drilling area. Fix the product to the wall to
ensure its stability. Use the type of screws and wall plugs for the
supporting material.
With time, the bindings can lose their effectiveness. Regularly
check the tightening of screws. If necessary tighten.
Recommendations for use
This product is designed for indoor use only.
Wood based products, particle board, painted, varnished and / or
lacquers may emit an odor when opening the carton.
This smell disappears after a few weeks if the room is properly
ventilated. Aerate the product because of the smell after assembly.
Maintenance
In order not to damage the surface, it is recommended that you do
not place hot or humid object directly on the surface.
Do not use magazines or newspapers as trivets. The ink used may
leave traces that can permanently stain the furniture surface.
To avoid scratches, do not use a sponge or recurrent grain cleaner.
The use of special products for furniture is not necessary
orrecommended. Clean veneer with a damp cloth. Then wipe with
a dry cloth.
Do not use abrasives.
Avoid placing it close to furniture a radiator or air conditioner.
The heat and humidity can cause cracks or deformation.
Clean with movements within the meaning of the wood.
Keep the label with lot number, it may be useful in case
BC
of complain.
If you have any comments or suggestions regarding this product,
assembly instructions or service received, please enquire at your
nearest store or contact us on our website at: www.habitat-design.
com or write to this address: HABITAT, 70 AVENUE VICTOR HUGO,
93300 AUBERVILLIERS FRANCE.
The packaging elements are to be sorted out according to local
requirements. Make the right sorting choice and give them a
second life!
By sorting out this manual you contribute in preserving
the environment. This manual can still be found on
www.habitat-design.com.
Roxanne - 03/2022
1
Publicidad
