Descargar Imprimir esta página

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Please read and follow all of the instructions & safety precautions detailed below prior to using this product.
Failure to do so may result in serious personal injury and / or property damage.
Do not expose this product to heat sources (including open flame or direct sunlight)
Do not expose this product to water or liquids. If liquid enters the product, immediately unplug the
product from any connected power sources or devices.
Do not disassemble or modify the product
Avoid dropping this product (or any other heavy impact which might damage the internal circuit)
In the unlikely event of any abnormalities (such as strange odor, overheating, leaking, color change,
etc.), discontinue use immediately.
Avoid cleaning this product using liquids or chemical substances (use dry cloth only)
Only use attachments/accessories specified by the manufacturer
Dispose of this item properly (do not dispose of it in trash receptacles and do not attempt to incinerate
it)
Do not leave this product unattended while it is in use or while it is being charged
This product is not a toy: KEEP AWAY FROM CHILDREN
Only re-charge this device using a USB port wall adapter (not included)
Do not re-charge via USB port on a computer
Do not charge more than 1 device per USB port at the same time
Do not use this product while it is being charged
When not being used for prolonged periods of time please charge every 3 months to avoid damaging
the battery
The T1026 is a sleek UL Certified 4,000 mAh aluminum power bank. Please see below product specifications
& user guide.
T1026 Specifications
1. Model: SP0178
2. Item No.: T1026
3. Battery Type: UL Certified Lithium Polymer battery
4. Battery Duration/Lifespan: 500 times
5. Capacity: 4,000 mAh
6. Power Input: 5V
7. Power Output: 5V
WARNING
Safety Precautions
T1026 USER MANUAL

Publicidad

loading

Resumen de contenidos para Spector&Co SPECTECH T1026

  • Página 1 WARNING Please read and follow all of the instructions & safety precautions detailed below prior to using this product. Failure to do so may result in serious personal injury and / or property damage. Safety Precautions  Do not expose this product to heat sources (including open flame or direct sunlight) ...
  • Página 2 8. Current Input: 1A 9. Current Output: 2.1A 10. Maximum Current Input: 1.2A 11. Operating temperature: 0~45˚C for Charging 0~50˚C for Discharging 12. Product Size: 4 3/8” x 1 5/8” x 11/16” 13. Net Weight: 107g 14. Charge Time: 4 hours 15.
  • Página 3 2. Blue LED lights will blink while your device is being charged (blue LED will remain lit once your device is fully charged) 3. To stop charging, disconnect the charging cable ITE: Accessories Lithium Polymer battery CAUTION: Risk of Fire and Burns, don’t open, crush, disassemble and dispose of in fire. Accessible surfaces held or touched for short periods only.
  • Página 4 AVERTISSEMENT S'il vous plaît lire et suivre toutes les instructions et consignes de sécurité indiquées ci-dessous avant d'utiliser ce produit. De ne pas prendre ces précautions pourrait entraîner des blessures graves et/ou des dommages matériels. Précautions de sécurité  Ne pas exposer le produit à des sources de chaleur (incluant les flammes nues ou la lumière directe de soleil).
  • Página 5 7. Puissance de sortie : 5V 8. Courant d’entrée : 1A 9. Courant de sortie : 2.1A 10. Courant d’entrée maximal : 1.2A 11. Température de travail : 0~45˚C de chargement 0~50˚C de déchargement 12. Dimensions du produit : 4 3/8po x 1 5/8po x 11/16po 13.
  • Página 6 dans le T1026 2. Les lumières LED bleues clignoteront pendant le chargement du dispositif (LED bleue demeurera allumée une fois le dispositif chargé) 3. Pour arrêter le chargement, débrancher le câble de chargement ITE: Accessories Lithium Polymer battery AVERTISSEMENT : Risque d’incendie et de brûlures ;...
  • Página 7 ADVERTENCIA Por favor, lea y siga todas las instrucciones y precauciones de seguridad que se detallan a continuación antes de utilizar este producto. El no hacerlo puede traer como consecuencia lesiones personales graves y/o daños materiales. Precauciones de seguridad  No exponer el producto a fuentes de calor (incluyendo las llamas abiertas y la luz directa del sol).
  • Página 8 8. Corriente de entrada: 1A 9. Corriente de salida: 2.1A 10. Corriente maxima de entrada: 1.2A 11. Temperatura de trabajo: 0~45˚C para cargar 0~50˚C para descargar 12. Dimensiones del producto: 4 3/8” x 1 5/8” x 11/16” 13. Peso neto: 107g 14.
  • Página 9 2. Las luces LED parpadearán mientras el dispositivo está cargando (LED azul permanecerá encendido una vez que el dispositivo está cargado). 3. Para detener la carga, desconectar el cable de carga. ITE: Accessories Lithium Polymer battery ADVERTENCIA : Riesgo de incendio y quemaduras; no abrir, quebrar, desmontar ni arrojar al fuego o incinerar. No tocar las superficies accesibles ni agarrar el dispositivo por mucho rato.