Jimmy HW11 Pro Max Manual De Instrucciones página 7

Packing List
Name
Quantity
Charging base Charging base
upper
1
Upholstery
brush
1
Product assembly and disassembly
Noted: Cut off electricity before product assembly and
disassembly.
Floorhead assembly and disassembly
To install the floorhead assembly, first align the bottom
of the mainbody assembly with the head of the floorhead
assembly, insert it down on the floorhead, and push it in
until a "click" sound is heard; To take out the floorhead ,
place the machine on the ground, hold the floorhead with
one hand and press floorhead release button with the
other hand, lift the mainbody up.(Fig 1)
Handle assembly and disassembly
Insert the end of the metal tube vertically to the port of
the mainbody assembly until hearing a "click" sound,
ensure that the metal tube is tight and not loose. To
remove the metal tube, insert a hard tool such as a
screwdriver into the metal tube release hole, and pull the
metal tube upwards. (Fig 2)
Battery pack assembly and disassembly
1. Slide battery pack along the slot and press the battery
pack down firmly until a"click"sound is heard. The battery
pack is locked. (Fig 3)
2. Press the battery pack release button and pull the
battery pack in the direction opposite to the assembly to
unlock the battery pack
Note: Except for the replacement of the battery pack, the
battery pack doesn't need to be taken out frequently.
Handle Battery pack
assembly assembly
1
Brushroll box
lower
1
Cleaning Cleaning
brush solution
1
Handheld
assembly
1 1
Cleaning solution
housing
1 1
Power cord
1 1
Mainbody
assembly
1
Handle
assembly
2
3
Mainbody Floorhead
assembly assembly
1
Electric mattress
Crevice tool
1
Instruction
manual
1
Floorhead release
button
Metal tube release
Battery pack
release button
Battery
pack
1
head
1
hole
5