Videos and experiment examples
Videos, literature and other probes can be found at
www.neulog.com.
In order to access the sound sensor's page, choose
"Products" on the main menu and then "Sound logger
sensor".
In order to access the sound sensor's experiments,
Choose "Example Labs":
Sound Isolation (P-29)
Sound waves (P-33)
Technical background
The philosophy behind NeuLog's plug and play
technology is based on each sensor's ability to store its
own data due to an internal flash memory chip and
micro-controller in each plastic NeuLog body. This
technology allows the sensor to collect and then store
the digital data in the correct scientific units (for
o
example:
C,
The sensor is pre-calibrated at the factory. The built-in
software in the logger can be upgraded for free at any
time using the provided firmware update.
The sound sensor uses an internal microphone with a
series of circuits, filters, and amplifiers to best isolate a
specific sound source. Sound waves enter through the
hole at the top of the sensor's plastic body so you should
point it directly towards the sound source for best
readings.
V2018.01
o
F, Lux, %, ppm).
20
Home
English