Publicidad
Idiomas disponibles
Idiomas disponibles
Anchor points - metal frame
Model SAN-0087-1-M
Mounting options for lifting bridles:
1. Directly on the metal frame (Image 3b)
2. With the help of the slings (Image 3c).
The strap slings are attached to the metal frame and the carabiners are attached to the strap slings.
We recommend mounting via the strap slings, as this prevents the carabiners from moving
back and forth between the two bars and avoids jerky changes in position.
Image 3a:
Mounting the patient restraint belts in the SAN-0087-1-M
4.1. Assembling or dismantling the two-piece basket stretcher
This section only applies for models SAN-0087-2 and SAN-0087-2- XXL.
1. Firmly push both parts of the basket stretcher together. The metal pins (guide pins) in the head support should disappear complete-
ly in the designated openings of the foot support. Ensure that no foreign objects (straps, pebbles, etc.) remain jammed between the
head and the foot support.
2. Close the central lock all the way to the stop using the provided Allen key (refer to Image 4). The Allen key is stored in an integrated
bag in the patient restraint strap
We recommend attaching the patient restraint strap with the Allen key in the centre of the stretcher to allow the stretcher to be
assembled/disassembled without removing the strap.
3. Lock the two external quick-locking devices (refer to Image 5).
Note! The quick-locking device can be adjusted, but is already set to the factory default setting. Ensure that the lock is closed but that
the base part is not subjected to additional traction.
The basket stretcher is dismantled in reverse order.
Image 4:
Locking the 2-piece basket stretcher
Image 3b:
Mounting
directly on the metal frame
UNLOCK
LOCK
Image 5:
Image 3c:
Locking of the external quick-locking devices
EN
13
Mounting
with the help of the slings
LOCK
Publicidad
