VEVOR E490T Manual Del Usuario página 150

hold if there is no error.The cutting button is used to cut the size of the first
knife of 60.0 mm, and then continue to press the cutting key to cut the
second knife size of 110.0 mm.After cutting the first knife and the second
knife, continue to press the cutting key to automatically return to the first
knife 60.0.
Cut and repeat until the cutting sequence is completed cut (it is invalid to
push books by yourself in the bisection mode).
 Shortcut mode
Click shortcut to switch to
shortcut mode. Several
common standard sizes
appear.Click the required size,
and the paper pusher will
automatically push to the first
size, as shown in the figure.
To edit the size, click Edit
mode, click standard size edit
to enter the modification
interface. After modification,
click the return icon,as shown
in the figure.
Basic regulation
 Size correction adjustment
If you find that the size is wrong, turn off the machine first, and press the
reset key after starting up, if there is any problem, do as follows; cut off the
power supply, remove the machine cover, and check whether there is any
foreign body stuck on the transmission screw.