Packaging Content - König SAS-DUMMYCAM35 Manual De Uso

Introduction:
CCTV dummy camera in outdoor plastic housing and equipped with a (fake) IR LED. The solar
panel powers the continuously flashing LED indicator and charges the rechargeable batteries
(not included). With sufficient lighting it's not even necessary to insert batteries. Professional
design for the impression of security. Mounting bracket included.
• We recommend that you read this manual before installing/using this product.
• Keep this manual in a safe place for future reference.

Packaging content:

• CCTV dummy camera
• Mounting screws and plugs
• Manual
Specifications:
• Housing: Plastic
• IP protection: IP44
• Battery: 2x AAA 1.5 V battery (not included)
• Dimensions: 180 x 83 x 78 mm (without bracket)
• Weight: 290 g (without batteries)
Insert the batteries to activate the flashing LED:
1. Open the battery compartment at the
back of the camera by turning the battery
compartment cover counter clockwise.
2. Place 2x AAA 1.5 V battery (or AAA NiMH
batteries) into the battery compartment
matching the polarity markings (+ and -), to
activate the flashing LED.
Replace the battery compartment cover
after placing the batteries by turning it
clockwise.
2
ENGLISH