Publicidad
Idiomas disponibles
Idiomas disponibles
PRODUCT SPECIFICATIONS
Maximum flow rate: 1.8 GPM (6.81 LPM) at 80 PSI
cUPC, WaterSense
Brushed gold, brushed nickel, chrome, matte black, and oil-rubbed bronze finishes
INSTALLATION INSTRUCTIONS
1.
Shut off the water at the main water supply. Remove the
existing showerhead (1.1) using an adjustable wrench or
pliers, if needed. Clean the threads of the shower arm (1.2).
2.
Apply one or two wraps of thread seal tape (B) onto the
threads of the shower arm (2.1) in a clockwise direction.
3.
Confirm a washer (3.1) is pre-inserted into the end of the
showerhead (A). Thread the showerhead (A) onto the shower
arm (3.2). Hand tighten, but do not overtighten.
Turn on the water and check for leaks.
1
2
2.1
3
3
B
B
A
Publicidad
