Publicidad
Idiomas disponibles
Idiomas disponibles
English
Safety instructions
• Protect the product against moisture
• Protect the product against direct sunlight
Hardware Installation
Note: For the installation of the hardware all devices should be turned off.
1.
Connect the included USB-C™ cable to the switch (PC1 / PC2) and connect
this cable to your USB-C™ video source.
2.
Connect the HDMI monitor to the HDMI output of the KVM.
3.
Plug in the USB power cable to a USB Type-A port or power supply.
4.
Now connect the cables of the mouse and keyboard to the KVM switch.
5.
Connect other USB devices to the USB 2.0 Hub if necessary.
6.
Turn on all connected devices.
Operation
By using the button on the top you can switch between the different video
sources.
Support Delock
If you have further questions, please contact our customer support
support@delock.de
You can find current product information on our homepage: www.delock.com
Final clause
Information and data contained in this manual are subject to change without
notice in advance. Errors and misprints excepted.
Copyright
No part of this user manual may be reproduced, or transmitted for any purpose,
regardless in which way or by any means, electronically or mechanically, without
explicit written approval of Delock.
Edition: 09/2023
-3-
Publicidad
