Socket Mobile DURASCAN D600 Guia Del Usuario página 18

Automatic Reconnections
Each time you power on the reader, it will automatically try to
connect to the last device it was connected to.
• Make sure the device is in range with Bluetooth turned on.
• Pressing the trigger button will initiate the attempts to connect.
• If using Application Mode, make sure the Reader-enabled
Application is launched or running.
• If a connection is made, the blue light will stop blinking and turn
solid.
• If a connection is not made after several attempts, the reader will
emit a long beep (and the blue light will turn off).
BLUETOOTH RECONNECTION
18