Orbegozo WF 1045 Manual De Instrucciones página 11

WF 1045 – WF 1050
STEP 1
Mount the rear grille to the engine case. Use the 4 screws.
STEP 2
Mount the blade to the motor shaft, matching the screw with the slot in the shaft. Secure the screw.
STEP 3
Assemble the front grille with the rear grille and secure them with the ring.
Verify that the ring fits well around the entire perimeter and that both grilles are well joined. Secure the ring
using the screw shown in the image.
11