Publicidad
Idiomas disponibles
Idiomas disponibles
PARTS IDENTIFICATION
(See [1] on page 4.)
る 〇 の ②@
〇 の 〇 @@⑯
0000050
Main Body
Intake grill
Pre-filter
· Deodorizing filter
HEPA Filter
Cord
Plug
Motion sensor
Operation/Display Panel
Air flow rate button
Timer button
Filter reset button
Operating lights
Timer indication lights
Replace filter indication
Features
©
(2
©
由
©
High flow rate and special filter quickly
and reliably catch pollen and household
dust floating in the air.
Deodorizing filter with activated charcoal
absorbs tobacco odors.
Design ensures quiet operation that will
not disturb sleeping person.
Has an action sensor to detect people's
movement and operate automatically.
8-hour timer is convenient when sleeping
or for operation over a long period of
time. Economical interval operation
function is also available.
BEFORE USE
Installing Filter
(See [1] on page 4.)
①
Remove the intake grill.
e
Apre-filter, a HEPA filter and a deodoriz-
ing fiber filter must be installed in the
intake grill.
(2)
Remove the pre-filter, HEPA filter and
deodorizing filter from the plastic bag.
③
Install the pre-filter ©, the deodorizing
filter © and the HEPA filter O) as
shown in the intake grill.
e
Install the HEPA filter according to the
instructions on the side of the filter.
(4)
Reinstall the intake grill on the main
unit.
USE
Operating Modes
You can select one of 3 operating modes on
this air refresher.
①
Automatic operation
(See [3 ト ① on page 5.)
For operation triggered by person's move-
ment.
e
Motion sensor adjusts air flow rate ac-
cording to the activity level in the room.
(2) Interval operation
(See [3]-(2) on page 5.)
For economical repeated on/off operation
e
Automatically repeats operating cycle in
20 minute interval (at normal air flow
rate).
(3)
Continuous operation
(See [3 ト ③ on page 5.)
For continuous operation at the specified air
flow rate
e
Select from High, Middle, and Low.
Publicidad
