Publicidad
Idiomas disponibles
Idiomas disponibles
scissors return to the open state and stop working.
CHANGE THE CUTTING SIZE
J
Beep!
Sonore!
Pitido!
This product could be adjusted to different opening
width.
While product is active, depress the Operator Presence
Switch while simultaneously depressing the ON/OFF
Trigger. 2 seconds later, please release the ON/OFF
Trigger after hearing a beep. Blades will change remove
exchange size between MAX cut opening and small cut
opening in order.
WARNING!: When the product is in the open
position, If you release the Operator Presence
Switch and the On/Off trigger, the product will stay
active for about one minute.
Need to re-run the product-
Within one minute, push the Operator Presence Switch
and later depress the ON/OFF Trigger, then the product
will be re-activated to work. Even if you release the ON/
OFF Trigger while depressing the Operator Presence
Switch, the product will be able to cut if you press the
ON/OFF Trigger within 20 seconds. The LED Light
Indicator will go out and the product will turn off if you
do not press the ON/OFF Trigger within 20 seconds.
The product will be powered down if no action within 1
minute.
STORAGE MODE & SWITCH OFF
K
Beep!
Beep!
Sonore!
Sonore!
Pitido!
Pitido!
While product is active, depress the Operator Presence
Switch while simultaneously depressing the ON/OFF
Trigger. The blades will close and beep once. Continue
EN
13
Publicidad
