Publicidad
Modello - Modèle - Model
Modell - Modelo - Modelo
Fabbricante - Constructeur - Manufacturer
Hersteller - Fabricante - Fabricante
Clean all the external parts of the cabinet ONCE
A WEEK.
Clean all the internal parts of the cabinet ONCE
A MONTH, following the instructions below:
• Disconnect the power supply to the cabinet
using the wall-mounted main switch-
disconnector ("Fig. 25").
• Empty the cabinet, storing the goods in
cold rooms or refrigerators to maintain the
preservation temperature.
• Wait for the inside of the cabinet to have
reached the ambient temperature and
then clean
• After carefully checking that the inside of
the cabinet is completely dry, restart the
appliance by re-energising the cabinet.
• After a couple of hours, load the goods
again.
When you put the cabinet out of service,
disconnect the power and follow the passages
above, leaving the doors open (if available) to
avoid odours.
Cleaning of the condenser
• To clean the condenser it is necessary to
remove the front decoration with grille.
N°DOC. UM000722 REV. "A" - 16/11/23
TWIN MIDI SV INTEGRAL
Epta Spa - Via Mecenate, 86 - 20138 Milano (MI) ITALIA
Tel. 02/55403211 Telefax 02/55401023
• Lift the panel at both ends and then pull it
outwards.
• Clean the condenser with a brush or a
vacuum cleaner, acting in the direction of
orientation of the fins so as not to bend or
deform them.
• Pay attention to the gas charging pipes; do
not bend them or move them enough to
clean.
Fig. 28
19/23
User manual
IT
FR
EN
EN
DE
ES
PT
Fig. 29
Fig. 30
Fig. 31
Publicidad
