AENO HD1 Guia De Inicio Rapido página 10

Button Action
Press once
Press once
Press and hold
Preparing the Device for First Use
1. Carefully open the package and remove the accessories and the travel bag
with the device. Take the device out of the travel bag.
2. Clean the device and accessories (see "Cleaning and Maintenance").
Operating Instructions
1. If you need to use a nozzle or an attachment, connect it to the device until
it clicks into place (see fig. B). The device can also be used without a nozzle
or an attachment.
2. Insert the power cord plug into an outlet.
3. Move the power switch to the I ("On") position.
Note. The ionization function is activated automatically each time the device is
turned on.
4. Adjust the temperature and the speed by pressing the corresponding
control buttons on the device once.
5. Dry the hair. Style it, if necessary.
6. Move the power switch to the O ("Off") position.
7. Unplug the device.
Cleaning and Maintenance
WARNING! Clean the device only after unplugging it and letting it cool down
completely.
Cleaning the case and the accessories. Wipe the case of the device and the
accessories with a soft cloth dampened in clean water, then wipe dry.
Cleaning the filter. The filter traps dust and hair that may enter the device
during its operation and storage. The filter should be cleaned every 2–4 weeks
10
Function
Switch the operating speeds of the
device
Switch the temperature modes of
the device
Activate Cool Shot
aeno.com/documents