Kesser K-THP Manual De Instrucciones página 14

There are three kinds of combinations of wall hangers, the left one, the bottom one, the right
one, according to the actual use of the environment, to choose the installation method,
please note that the top and bottom two parts of the wall hangers are not the same, please
pay attention to the installation, one is fixed on the wall, one is fixed on the product, and then
fixed by two bolts and nuts, screw the nut by hand, and then fixed with a screwdriver. Do not
try to fix it by hand alone.
Note: Before drilling the wall, make sure that there are no cables or pipes in the wall and
make sure that the fixing screws are tight to ensure that the heater is securely fixed to the
wall.
Mark the wall according to the dimensions given below for the heater models you have
purchased, drill into the wall and insert the iron dowels into the holes and tighten the screws.
Distance
A
B
Hergestellt für Dilaw Warehouse GmbH // Fuggerstraße 15a // 48165 Münster // Germany
14
K-THP-18 K-THP-24
421 mm 521 mm
60 mm 60 mm
www.eshopping.de