Publicidad
Idiomas disponibles
Idiomas disponibles
Battery
The backpack sprayer is supplied without batteries included, and
is compatible with POWER 21 V batteries.. The battery is easy to
remove and it is rechargeable, with the supplied battery charger.
The battery compartment is located on the side of the base of
the tank. The autonomy of the battery can vary, depending on the
operating pressure and battery used.
Shoulder harness
The backpack sprayer features an ergonomic shoulder harness
for carrying the pump on the shoulders, designed for an optimal
balancing of the load during operations. The harness, made from
resistant and breathable material, features padded shoulder straps
and an internal-support plate for the back. The chest and waist
straps are adjustable, in order to best fit different body-types.
Starting the sprayer and selecting the operating pressure
The power switch also adjusts the operating pressure level. The battery level
indication is with 3 LEDs.
Step 0: OFF, Step 1: Start internal mixing (0.8 Bar), Step 2: Pressure level 1
(2.5 Bar) Step 3: Pressure level 2 (5 Bar).
For optimal mixing without creating excessive foam, fill the canister to the
level of the mixing nozzle. Then switch the sprayer on in mixing mode (1/MIX)
and add the product. Then fill the rest of the canister while still mixing. Before
treatment, check that the product used (insecticide/fungicide) has dissolved.
Finally set the desired power level and start with the treatment.
Special seals
The backpack sprayer is equipped with special FPM-seals, that allow
using aggressive products.
36
Art. 404 / Art. 405 / Art. 406
Ergomist Electric backpack sprayer 12, 15 and 20 L 21 V
Assembly and use
Art. 404 / Art. 405 / Art. 406
Ergomist Electric backpack sprayer 12, 15 and 20 L 21 V
Assembly and use
How to mount the spray lance
A
A
B
Control of switch handle
The sprayer is equipped with an overload protection unit, which will enable the hydraulic pump
to release pressure automatically when the switch is closed or the nozzle is blocked during
normal spraying operation.
1.
Spray jet interrupted
2.
Keep the lever pressed for continuous spray.
3.
Snap the safety clip into place for continuous spray without having to squeeze the handle
with your hand.
1
Cleaning and maintenance
After every spraying operation, the sprayer shall be cleaned and washed with special care for the
inner nozzle and sprayer, to avoid corrosion and blocking of sprinkler caused by the liquids used. The
cleaning can also avoid reducing the effects of spraying operation when the residue of the pesticide
is different from that of the next operation. The sprayer should be stored in a dry indoor place.
For further information about the product, please contact info@stockergarden.com.
Sign up to our newsletter and keep up to date with our latest news www.stockergarden.com/newsletter
B
C
C
2
3
37
Publicidad
