Publicidad
Idiomas disponibles
Idiomas disponibles
Ice Maker
This ice maker works automatically (automatic water supply, automatic production and detaching of ice
cubes), therefore there is no need to supply water manually. When the ice cube storage is full, the sensor
rod will automatically send a signal to the machine to stop making ice.
Doing so may result in injury.
refrigerator from electrical power before connecting a water supply line to the refrigerator.
properly. Chemicals from a malfunctioning softener can damage the ice maker.
Tips
closed position.
plumbing lines may cause ice maker to cycle two or three times before making a full tray of ice.
New plumbing may cause ice to be discoloured or to have poor flavour during the first 24 hours.
Making Ice Cubes
water supply pipes properly according to the installation manual. Once the water supply is connected
properly, connect the refrigerator to the electrical power supply.
diagram on the machine's cover.
temperature of the water inside the ice making tray, as well as the machine's status.
Before Installing the Water Supply Line, You Will Need:
(WARNING: Connect to drinkable water supply only.)
Access to a household cold water line with water pressure between 30 and 100 psi
(2 and 6.9 bar).
DO NOT use a self-piercing type shutoff valve.
To Connect Water Supply Line to Ice maker Inlet Valve
arm's on/off positions).
1
Publicidad
