Thulos MOBILE+ MB-CTR-04 Manual De Instrucciones página 7

- Do not handle damaged or leaking lithium-ion batteries.
- Battery life is limited. Battery life will gradually decrease with repeated use and
gradually with repeated use and time.
- Battery life also varies depending on storage method, usage conditions and
environmental factors.
- Charge in an environment where the temperature ranges from 50F-86F (10ºC - 30ºC).
Charging may not be as effective when used in other environments.
- If the controller is not used for a prolonged period of time, it is recommended that it be
fully charged at least twice a year to help maintain battery functionality.
- Batteries are not covered by the warranty, as they are considered consumable parts due
to wear and tear from use and treatment.
- If you notice that the battery does not perform as well as it did at the beginning, it is a
sign of wear and tear, you should buy a new one with exactly the same characteristics
and replace it.
LINKING THE CONTROLLER TO THE CONSOLE
- In the sleeping state of the controller, use the USB data cable to connect the PS4 host
and complete the pairing. Press the PS button to connect wirelessly, unplug the cable to
control wirelessly (automatically pair the LED).
- Successfully connected, no matter the PS4 host is in standby, you can directly press the
PS button, and the LED will flash slowly. Automatically connect again.
- You can use 4 controllers at the same time, the RGB lights will be in the order of blue,
red, green, pink. Turn on the lights and configure each gamepad.
CONNECT TO BLUETOOTH MODE OF THE PC
- Press and hold SHARE+PS to enter pairing, the LED will flash quickly, search and
connect the wireless controller.
- Enter the computer's Bluetooth for pairing, if the pairing is successful, you can play
computer games.
- It has been successfully connected, you can directly press the HOME button, the LED
will flash slowly in the form of a marquee, and it will automatically connect to the
computer.
VIBRATION FUNCTION
To disable the vibration function, select [Settings] -> [Devices] -> [Drivers] in the function
screen and remove the check mark from [Enable vibration].
WIRE CONNECTION
Connecting the PS3 console
- Under the suspended state of the controller, use the USB cable to connect to the PS3.
- If the connection is successful, the corresponding LED light will always be on.