Publicidad
Idiomas disponibles
Idiomas disponibles
Step By Step Assembly Instructions:
Step1: Insert handle (A) into hole in Mesh wire cover (B) and tighten it with M6 Nut
(AA) underside to secure
A
Step 2: Connect the legs (F) to the upper ring (E) by using M6 x 10 mm bolt (BB), Please
DO NOT tighten the hardware at this time.
F
www.costway.com
AA
B
BB
E
04
Step 3: Connect the bottom ring (G) to the legs (F) by using M6 x 25 mm bolt (CC) and
M6 Nut (AA). Tighten all the hardware.
F
Step 4: For fire pit use, place parts orderly: put fire bowl (D) onto the base assembly, put
Iron grate(C) into fire bowl (D); and then put mesh wire cover (B) onto the fire bowl (D);
finally place poker (H) beside base assembly.
B
C
H
www.costway.com
AA
G
D
05
CC
Publicidad
