EN
Safety Instructions
Please take a few moments to carefully read through this manual. Correct maintenance and operation
of this machine will provide the best possible performance from your Rowlett product. Save these
instructions.
• A service agent/qualified technician should carry out
installation and any repairs if required. Do not remove any
components on this product.
• Consult Local and National Standards to comply with the
following:
- Health and Safety at Work Legislation
- BS EN Codes of Practice
- Fire Precautions
- IEE Wiring Regulations
- Building Regulations
• Before use check that the voltage of your power supply
corresponds to the one shown on the rating plate.
• DO NOT operate the unit if damaged.
• To protect against electrical shock, do not put motor unit in
water or any other liquid.
• Blade is sharp – handle carefully.
• The use of accessory attachments not recommended or sold
by Rowlett may cause fire, electric shock, or injury, which will
invalidate your guarantee.
• DO NOT remove food from the appliance until the blending
attachments have come to a complete stop.
• Avoid contacting moving parts. Keep hands, hair, clothing and
utensils away from blending attachment and container while
operation to prevent the possibility of severe injury to persons
and/or damage to the appliance.
• DO NOT use jet/pressure washers to clean the appliance.
• DO NOT use to blend hard and dry substances. Otherwise the
blade could be blunted.
• Do not let cord hang over edge of table or hot surface.
2
FB973_ML_A5_v2_20230925.indb 2
2023/9/25 17:17:18