AKASO H Band 3 Manual De Usuario página 5

4. Click "Settings" and enter the settings interface, then click "H Band 3" to enter the
Function Settings Interface.
LIGHTEN UP THE FITNESS TRACKER
Press the touch area, or activate the "Turn the wrist" function in the APP function Settings,
then turn over the wrist and the fitness tracker brightens automatically. (The sensitivity of
"Turn the wrist" is adjustable: APP Setting > My device (H-Band 3) >Turn the wrist)
Note: If you adjust the sensitivity to the highest
level, it will consume a lot of power.
05
Function Settings Interface
Sensitivity Adjustment Diagram
FITNESS TRACKER FUNCTION INTRODUCTION
1. Introduction of equipment functional interfaces
Press the touch area and you can change between multiple functional interfaces.
39
sport
12/18
Tue
Time Run
000 00.0
bpm hours
Heart Rate Sleep Find Phone
Tips: "Find Phone", the "Countdown" and the "Stopwatch" interfaces are closed by default.
You need to restart those functions through APP Setting > My device(H-Band 3) >
Switch settings / Countdown.
2. Running Mode
On the running interface, press the touch area for 3 seconds to enter the running mode.
While in running mode, you can press the touch area to change between "Running Data",
"Pause" and "Exit" interfaces. "Running Data" interface display running time, heart rate,
running distance, calories, and steps in real time. While in the pause or exit Interfaces, press
the touch area for 3 seconds to pause or exit running mode.
00:00:00
000
32645
sport
12335
06/21 24H
Running interface Running Data
00265 00.0
steps Km
Steps Mileage Calories
06/21 06/21 24H 24H
Stopwatch Countdown
Pause
0000
Kcal
Turn Off
Exit
06